产品中心您的位置:网站首页 > 产品中心 > > 探伤仪 > Sonic 1200M便携式超声探伤仪
便携式超声探伤仪

便携式超声探伤仪

产品时间:2018-01-06

简要描述:

Sonic 1200M超声探伤仪具有可简化操作过程的模块化显示特性。这款仪器还具有以下多种创新型功能:排列整齐的键盘、飞梭旋钮(Smartknob™)、可自行定义的互换式显示,以及PowerLink技术

打印当前页

发邮件给我们:81069820@qq.com

分享到:

Sonic 1200M Specifications*


Pulser
Type: Selectable, spike or square wave
Pulse Width: 15 to 1000 ns
Pulse Voltage: Selectable 300/150 volts
Damping: 25, 50, or 200 ohms
Modes: Selectable single (pulse echo), dual, or through transmission


Receiver
Frequency Band: 0.3 to 20 MHz
Tuning: Selectable 0.5, 1, 2.25, 3.5, 5, 10, 15, Wideband (0.3 - 20 MHz), Highpass (3 - 20 MHz)
Gain Control: 0 to 110 dB
Control: Continuous adjustment in selectable 0.1, 0.2, 0.5, 1.0, 2.0, 6.0, 12 dB
Linear Reject: 0 to 80% full screen
Modes: RF, fullwave, half+, half-, fullwave filtered: 10, 5 and 2.25 MHz


Gates
Functions: Dual flaw gates. Gate 1 time of flight, or amplitude detection, flaw alarm. Gate 2 amplitude detection, flaw alarm or time of flight for echo-to-echo mode. Gate 1 selectable IP or IF sync
Indicator: Flashing LEDs and horn
Peak Amplitude: Peak amplitude of gated signal in percent of screen height
RF Gates: Positive logic requires that a signal cycle of either polarity cross a gate level; negative logic requires that no signal cross a gate level.


Time Base
Range: 0.048 to 296 inches (1.23 to 7511 mm) of steel (0.418 to 2560 μs)
Delay: -1.16 to 185 inches (-29 to 4.7 mm) of steel (-10 to 1600 μs)
Velocity: 0.025 to 0.600 in/μs (635 to 15240 m/s) horiz. linearity +/- 1% of full screen
Pulse Rate: Selectable maximum; 50 Hz steps, 50 to 4000 Hz, limited by range and pulser settings 
Thickness
Range: 0.005 inches (0.127 mm) up to the maximum display range setting
Modes: IP - Gate 1, IF to Gate 1, Gate 1 to Gate 2
Trigger Modes: Peak or edge
Trig. Functions: Angle beam calculations, curved surface correction
Angle: 0º - 90º in 0.1º increments display features
Signal: Hollow or filled
Screen Freeze: On command, currently displayed signal is frozen
Waveform Recall: Select and display stored waveform
Peak Hold: Displays peak amplitude with active signals under peak signal
A-scan Storage: Up to 100 A-scan waveforms may be stored for playback or printout
A-scan Security: Read-only selection prevents accidental erasure of A-scans
Update Rate: 60 Hz
Persistence: Adjustable from 0.1 to 10.0 seconds in 0.1 second steps
Display Average: Selectable 2,4,8 and 16 frames


Additional Features

VGA Output
RS-232: DB-9P connectors
Analog Output
PowerLink™: Automatic transducer recognition and application setups. Transducer identification on printouts
Program Storage: Up to 200 test setups (additional 100 setups with A-scan storage)
Clock, Calendar: Time and date information stored and printed with each waveform
Languages: Selectable - English, Spanish, French and German
Software: Windows-based FlawMaster™ general
Dimensions: 9.5" L x 5.5" W x 3.5" D (241 mm x 140 mm x 89 mm)
Weight: 3.8 lbs (1.7 kg)
Display: Customer-Interchangeable QVGA (320 x 240 pixels) monochrome backlit liquid crystal display (LCD), color LCD, or Hi-Brite EL display
Operating Temperature: -4o to 140o F (-20o to 60o C)
Storage Temperature: -40o to 176o F (-40o to 80o C)


Power
DC: One Li-Ion battery, optional external D-Cell battery pack
AC: 90 264 volt, 50-60 Hz mains
Battery Operating Time: 10+ hours
Humidity: Safe operation in exposure to Class 3 temperature/humidity environments (5 to 95%)
Classification: Based on Class 2 specifications from the MIL-PRF-28800F
Altitude: Maximum operating and non-operating altitude - 15,000 ft. (4600 m)
Hazardous Area Operation: Safe operation in explosive atmosphere as defined by Class I, Division 2, Group D, as found in the National Fire Association Code (NFPA 70), Section 500, and tested using MIL-STD-810E, Method 511.3, Procedure 1


DAC
Type: Segmented, 25 selected points
Gain: 40 dB, total of gain and DAC limited to 110 dB maximum
Display: Selection of multiple curves showing compensation: single curve at signal level (0 dB), three curves at +6 dB, 0 and -6 dB levels, four curves at +6 dB, 0, -6 dB and -14 dB levels, DAC compensated echoes only, single curve with DAC compensated echoes
Reference Memory: Recall waveform displayed simultaneously with active signal
Data Logging: 5000 readings

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
网站首页 关于我们 新闻中心 产品中心 联系我们
备案号:   GoogleSitemap   技术支持:化工仪器网 管理登陆
山东恒美电子科技有限公司(www.hengmei17.com)为您提供详细的Sonic 1200M便携式超声探伤仪介绍,欢迎来电咨询相关信息! 版权所有 总访问量:315837
    QQ在线客服
  •   在线咨询
  • 点击这里给我发消息
电话
0536-2223430
手机
19953627753